• Solid wood / Engineered composite wood Barn door
  • Solid wood / Engineered composite wood Barn door

Solid wood / Engineered composite wood Barn door

Item: Barn door

Height: 78” , 80” , 82” , 84” , 86” , 96”

Width: 24” , 26” , 28” ,30” , 34” ,36”

Thickness: 35mm, 40mm, 45mm, 50mm

While you can buy doors intended for a barn-door installation (Home Hardware and Home Depot have lightweight K- and Z-style doors), virtually any door can be converted to a barn door with special tracks and hangers.

TUXIW1


Product Detail

Product Tags

SPECIFICATION

Height 1.8 ~ 3 meter
Width 45 ~ 120 cm
Thickness 35 ~ 60 mm
Panel Plywood/MDF with natura venner, solid wood panel
Rail & Stile Solid pine wood
Solid Wood Edge 5-10mm Solid wood edge
Veneer 0.6mm natural walnut, oak , mahogany, etc.
Surace Finishing UV lacquer, Sanding, Raw unfinishing
Swing Swing , sliding , pivot
Style Flat, flush with groove
Packing carton box , wood pallet

PRODUCT DETAIL

Barn door 1
shaker & raised moulding (2)

ACCESSORY

barn door hardware

Package&Shipping

1 carton box
2 packed in pallet
3 Loading (2)

DRAWING

Drawing

How much wider Should a barn door be than the opening?

Your door's width should be 2 to 3 inches wider than the door opening and 1 inch higher than the dimensions of your opening. The determining factor in how high or how wide you want to go is just how much you want your sliding door to overlap with the opening.

Do barn doors need a bottom track?

To be safe, barn doors need a bottom guide to prevent the door from swinging or coming off the track. ... The piece is affixed to the wall trim and creates a channel which the barn door slides into. Once properly installed, the EZ Install Bottom Guide prevents the door from coming off the wall.

Can you put a barn door on a bathroom?

Yes, barn doors can lock! ... Rustica offers a couple of options for barn door locks for bathroom entryways, cabinets, and closets, so installation will differ just a bit between the two products. If you've purchased a teardrop latch, you'll need to install the final piece into the door jamb.


  • Previous:
  • Next:

  • Write your message here and send it to us